P4 P6 P8 P1

Caratteristica

•Light transmittance
>90%, ultimate transparency (applicable to high-resolution screens)
Generally 70% A 90% (with possible slight haze)
•Refractive index
Approach the glass (1.47-1.50) to reduce reflection
Slightly higher (1.50-1.55), the reflection may be more significant
•Anti-yellowing
High stability, not prone to yellowing even after 5 years of long-term use
It requires additives and is prone to aging and yellowing within one or two years
Cost comparison
The raw materials (such as optical-grade acrylate) and the process are complex (film die-cutting, environmental purification,
etc.), resulting in high costs.
The raw materials and process are simple (liquid coating, curing), and the cost is about 30% A 50% lower than OCA glue.

P4 P6 P8 P1

Led Crystal Film Screen withUltra -thin, ultra-light
The thickness of the film screen is 1-3mm, and the weight is only 1- 3.5kg
High permeability
The film screen light source installed on the qlass has a maximum permeability of 86%,which does not affect daily lighting
Invisibility
The light emitting chip adopts micron light source,and uses transparent, high temperature resistant.anti-static and waterproof flm for solid adhesive
protection. The LED light and driver chip are invisible to the naked eye, and there is no cabinet and mask structure
Easy to install
Just attach the film screen gently, and then connect the signal and power supply.
Led Crystal Film Screen withCost saving
There is no need for steel frame structure and no need to change the appearance of the building, effectively reduaing transportation and installation costs
High heat dissipation
Super heat dissipation, improve the photoelectric conversion eHiciency, reduce the
failure rate of the display screen, so that theLed Crystal Film Screen life is longer and the maintenance cost is reduced.